NCERT Solutions for Chemistry Part 1 Chapter 3 – Classifications of Element and Periodicity

(i) Lawrencium (Lr) has a Z of 103 while Berkelium (Bk) has a Z of 97.

(ii) Seaborgium (Sg) has a Z of 106.

 

The first phase has two elements, while the second period has eight. The element with Z=11, begins the third period. In the third period, there are now eight elements. As a result, the third period finishes with the element with Z=18,i.e., the element in the third period's 18th group. As a result, the element in the third period's

17th group has the atomic number Z=17.

 

The primary idea of the periodic table's organization is to organize elements into periods and groups based on their qualities. This arrangement simplifies and organises the study of elements and their compounds. Elements with comparable characteristics are grouped together in the periodic table.

 

In his periodic chart, Mendeleev organized the elements by atomic weight or mass. In order of increasing atomic weight, he divided the elements into periods and groups. He grouped elements that have comparable qualities together. He did not, however, keep this arrangement for long. He discovered that if the elements were ordered strictly in order of increasing atomic weights, several of them would not fit into this classification scheme.

As a result, in certain circumstances, he neglected the atomic weight order. The atomic weight of iodine, for example, is smaller than that of tellurium. Despite this, Mendeleev ranked tellurium (Group VI) ahead of iodine (Group VII) because the characteristics of iodine are so similar to fluorine, chlorine, and bromine.

 

 

A period is the value of the primary quantum number (n) for the outermost shells in the periodic table of the elements. The filling of the primary quantum number begins each period (n). For the sixth period, the value of (n) is 6. The azimuthal quantum number (l) for n=6 can be 0,1,2,3 or 4. The Aufbau principle states that electrons are introduced to distinct orbitals in order of increasing energy. The

6d subshell has an even higher energy than the 7s subshell. Only the 6s,4f,5d and 6p subshells can be filled by electrons in the 6th period. Now, the 6s has one orbital, the 4f has seven, the 5d has five, and the 6p has three. As a result, there are a total of sixteen orbitals available (1+7+5+3=16). Each orbital can only hold two electrons, according to Pauli's exclusion principle. As a result, 16 orbitals can hold a maximum of 32 electrons. As a result, the periodic table's sixth period should have 32 elements.

 

The periodic table's 7th period has elements with atomic values ranging from Z=87−114. As a result, the element with Z=114 is found in the periodic table's

7th period. The first two elements with Z=87 and Z=88 are s-block elements in the seventh period, while the next 14 elements with Z=90−103 are f-block elements. d – block elements are those with Z=89 and Z=104−112, whereas

p – block elements are those with Z=113−118. As a result, in the 7th period, the element with Z=114 is the second p – block element. As a result, the element with Z=114 is found in the periodic table's 7th period and 4th group.

 

The quantity of valence electrons affects the physical and chemical properties of elements. The number of valence electrons in a group of elements is the same. As a result, physical and chemical properties of elements in the same group are comparable.

 

The radius of an atom is known as its atomic radius. It is used to determine the size of an atom. If the element is a metal, the atomic radius is the metallic radius; if it is a nonmetal, the atomic radius is the covalent radius. The internuclear distance separating the metal cores in a metallic crystal is half the metallic radius. In solid copper, for example, the internuclear distance between two neighboring copper atoms is 256 pm. As a result, the metallic radius of copper is calculated to be, 

Metallic radius of copper=2562=128 pm

In a covalent molecule, the covalent radius is the distance between two atoms when they are connected by a single bond. The distance between two chlorine atoms in a chlorine molecule, for example, is 198 pm. Thus, the covalent radius of chlorine is,

Covalent radius of chlorine=1982=99 pm

The radius of an ion is referred to as its ionic radius (cation or anion). The distances between the cations and anions in ionic crystals can be used to compute the ionic radii. Because a cation is generated by removing an electron from an atom, it has fewer electrons than the parent atom and hence has a higher effective nuclear charge. As a result, a cation is smaller than its parent. The ionic radius of Na+ is 95 pm, while the atomic radius of the Na atom is

186 pm. An anion, on the other hand, is larger than its parent atom. This is due to the fact that an anion has the same nuclear charge as the parent atom but contains more electrons, resulting in higher electron repulsion and a drop in the effective nuclear charge. The ionic radius of the F− ion, for example, is 136 pm, while the atomic radius of the F atom is 64 pm.

 

Across a period, the atomic radius decreases from left to right. Because the outer electrons are present in the same valence shell during a period and the atomic number increases from left to right across a period, the effective nuclear charge increases. As a result, electrons become more attracted to the nucleus.

The atomic radius, on the other hand, tends to rise as you progress through the groups. This is due to the fact that as the primary quantum number (n) decreases, the distance between the nucleus and valence electrons rises.

 

Isoelectronic species refer to atoms and ions that have the same number of electrons.

(i) The F− ion possesses a total of 10 electrons. As a result, the species that is isoelectronic with it will contain 10 electrons as well. Na+ ion (11−1=10) electrons, Ne (10 electrons), O2− ion (8+2=10) electrons, are some of its isoelectronic species.

(ii) Ar possesses a total of 18 electrons. As a result, the species that is isoelectronic with it will contain 18 electrons as well.

S2− ion (16+2=18) electrons, Cl− ion (17+1=18) electrons, and Ca2+ ion

(20−2=18) electrons are some of its isoelectronic species.

(iii) The electron count of the Mg2+ ion is 10 electrons. As a result, the species that is isoelectronic with it will contain 10 electrons as well. Na+ ion (11−1=10) electrons, Ne (10 electrons), O2− ion (8+2=10) electrons, are some of its isoelectronic species.

(iv) The electron count of the Rb+ ion is 36 electrons. As a result, the species that is isoelectronic with it will contain 36 electrons as well. Br− ion (35+1=36) electrons, Kr (36 electrons), and Sr2+ ion (38−2=36) electrons) are some of its isoelectronic species.

(a)

The number of electrons in each of the provided species (ions) is the same (10 electrons). As a result, the species in question are isoelectronic.

(b) 

As the magnitudes of nuclear charge fall, the ionic radii of isoelectronic species increases. The following is the order in which the supplied species are arranged in order of increasing nuclear charge.
N3−<O2−<F−<Na+<Mg2+<Al3+.

As a result, the following is the order of the supplied species in terms of increasing ionic radii:

Al3+<Mg2+<Na+<F−<O2−<N3−.

 

A cation possesses fewer electrons than its parent atom while maintaining the same nuclear charge. As a result, a cation's nucleus attracts electrons more than its parent atom's nucleus. As a result, a cation is smaller than its parent atom in size. An anion, on the other hand, possesses one or more electrons than its parent atom, resulting in higher electron repulsion and a reduction in effective nuclear charge. As a result, anions have a greater distance between their valence electrons and the nucleus than their parent atom. As a result, the radius of an anion is bigger than that of its parent atom.

 

The energy required to remove an electron from an isolated gaseous atom in its ground state is known as ionization enthalpy. Despite the fact that the atoms are far separated in the gaseous state, there are some attraction forces between them. It is impossible to isolate a single atom to calculate the ionization enthalpy. However, by lowering the pressure, the power of attraction can be reduced much more. As a result, in the definition of ionization enthalpy, the term "isolated gaseous atom" is employed.

The most stable state of an atom is called the ground state. If an isolated gaseous atom is in its ground state, removing an electron from it will need less energy. As a result, ionization enthalpy and electron gain enthalpy for an ‘isolated gaseous atom' and its ‘ground state' must be established for comparison reasons.

 

The energy of an electron in the hydrogen atom's ground state is −2.18×10−18J. As a result, the energy required to remove that electron from the hydrogen atom's ground state is 2.18×10−18J. Thus, the ionization enthalpy of atomic hydrogen is 2.18×10−18J.

As a result, the ionization enthalpy of atomic hydrogen in terms of J mol−1 can be calculated as,

Ionization enthalpy = 2.18 x 10⁻¹⁸ x 6.02 x 10²³J mol⁻¹

= 1.31 x 10⁶ J mol⁻¹

 

(i) The electron to be removed from a beryllium atom during the ionization process is a

2s electron, whereas the electron to be removed from a boron atom is a 2p-electron.

2s-electrons are now stronger than 2p-electrons in their attachment to the nucleus. As a result, removing a 2s electron from beryllium requires more energy than removing a 2p electron from boron.

(ii) O has lower ionization enthalpy than N and F?

The three 2p-electrons of nitrogen occupy three separate atomic orbitals in nitrogen. In oxygen, however, two of the four 2p-electrons share the same 2p-orbital. Increased electron-electron repulsion occurs in the oxygen atom as a result of this. As a result, removing the fourth 2p-electron from oxygen requires less energy than removing one of the three 2p-electrons from nitrogen. As a result, oxygen has a lower ionization enthalpy than nitrogen. Fluorine has one extra electron and one more proton than oxygen. The increase in nuclear attraction (due to the addition of a proton) is greater than the rise in electronic repulsion as the electron is added to the same shell (due to the addition of an electron). As a result, the valence electrons in fluorine atoms have a greater effective nuclear charge than the electrons in oxygen atoms. As a result, removing an electron from a fluorine atom requires more energy than removing an electron from an oxygen atom. As a result, oxygen has a lower ionization enthalpy than fluorine.

 

Sodium has a higher initial ionization enthalpy than magnesium. This is mostly due to the following two factors:

(a) Sodium's atomic size is larger than that of magnesium.

(b) Magnesium has a higher effective nuclear charge than sodium.

As a result, the energy required to take an electron from magnesium is more than that necessary to remove an electron from sodium. As a result, sodium's first ionization enthalpy is smaller than magnesium. The second ionization enthalpy of sodium, on the other hand, is larger than that of magnesium. Because sodium loses an electron, it achieves the stable noble gas structure. Magnesium, on the other hand, retains one electron in the 3s orbital after losing an electron. It still has to lose one more electron to achieve the stable noble gas structure. As a result, the energy required to remove the second electron in sodium is significantly more than that required in magnesium. As a result, sodium's second ionization enthalpy is greater than magnesium's.

 

The following are the causes that cause the ionization enthalpy of the primary group elements to fall along a group:

(i) Elements' atomic sizes grow larger: The number of shells grows as we proceed down a group. As a result, as you move down a group, the atomic size gradually increases. The valence electrons are not held as tightly when the distance between them and the nucleus grows. As a result, they can be simply removed. As a result, as you move down a group, the ionization energy diminishes.

(ii) Shielding effect: As you move down a group, the number of electrons in their inner shells grows. As a result, the inner core electrons protect the valence electrons from the nucleus as they go along a group. As a result, the nucleus does not hold the valence electrons particularly tightly. As a result, the energy required to remove a valence electron reduces as the group number increases.

 

 

The ionization enthalpy reduces with the atomic size and electron shielding lowers as you move down a group. Ionization enthalpy reduces from B to Al, as you move down group 13. Ga, on the other hand, has a larger ionization enthalpy than Al. Al comes after the s–block elements, while Ga comes after the d–block elements. d-electrons do not provide very good shielding. The valence electrons are not well shielded by these electrons. As a result, Ga valence electrons have a higher effective nuclear charge than Al valence electrons. Furthermore, when the atomic size and shielding drop from Ga to In, the ionization enthalpy reduces. However, as the ionization enthalpy increases from

In to Tl, the ionization enthalpy decreases. Tl is found after the 4f and 5d electrons in the periodic table. The electron shielding offered by each of these orbitals is ineffective.
As a result, the nucleus tightly holds the valence electron. As a result, Tl's ionization energy is on the upper side.

The elements O and F are found in the same periodic table period. F atom has one more proton and one more electron than an O atom, and because an electron is added to the same shell, F atomic size is lower than O's. Because F has one extra proton than O its nucleus may attract incoming electrons more strongly than the nucleus of the O atom. Furthermore, F just requires one extra electron to achieve the stable noble gas structure. As a result, the electron gain enthalpy of F is lower than that of O.

(ii) F and Cl belong to the same periodic table group. Moving down a group, the electron gain enthalpy usually gets less negative. However, the electron gain enthalpy of Cl is less negative than that of F in this scenario. This is due to the fact that F atomic size is smaller than Cl. The electron will be added to quantum level n=2 in F but it will be added to quantum level n=3 in Cl. As a result, there are fewer electron-electron repulsions in

Cl and an extra electron can be easily tolerated. As a result, Cl electron gain enthalpy is lower than that of F.

Energy is released when an electron is added to the O atom to form the O− ion. As a result, O first electron gain enthalpy is negative. O+e−→O− When an electron is added to an O− ion to generate an O2− ion, however, energy must be given out to overcome the strong electronic repulsions. As a result, O's second electron gain enthalpy is positive.

O−+e−→O2−

 

The tendency of an isolated gaseous atom to accept an electron is measured by electron gain enthalpy, whereas the tendency of an atom in a chemical compound to attract a shared pair of electrons is measured by electronegativity.

 

An element's electronegativity is a changeable property. It varies depending on the chemical. As a result, the statement that all nitrogen compounds have an electronegativity of 3.0 on the Pauling scale is erroneous. The electronegativity of N in NH3 and NO2 is different.

(a) An atom's size increases when it gains an electron. The number of electrons increases by one when one is added. The electrons' repulsion increases as a result of this. The number of protons, however, remains constant. As a result, the atom's effective nuclear charge drops while its radius increases.

(b) When an atom loses an electron, the number of electrons in the atom reduces by one, but the nuclear charge does not change. As a result, the atom's interelectronic repulsions decrease. The effective nuclear charge rises as a result. As a result, the atom's radius shrinks.

 

The number of electrons and protons (nuclear charge) in an atom determines its ionisation enthalpy. The protons and electrons in an element's isotopes are now the same. As a result, for two isotopes of the same element, the first ionisation enthalpy should be the same.

 

 

(a) Identify an element with five electrons in the outer subshell. 

Ans : An element with 5 electrons in its outermost subshell should have the electrical configuration ns2np5. The electronic configuration of the halogen group is as follows. The element can therefore be F, Cl, Br or I.

(b) Identify an element that would tend to lose two electrons. 

Ans:To achieve the stable noble gas configuration, an element with two valence electrons can simply lose two electrons. The element's overall electrical configuration will be ns2. The electrical configuration of group 2 components is shown here. Be, Mg, Ca, Sr and Ba are the elements found in group 2.

(c) Identify an element that would tend to gain two electrons. 

Ans: If an element only requires two electrons to achieve the stable noble gas state, it is likely to gain two electrons. As a result, such an element's general electrical configuration should be ns2np4. The electrical configuration of the oxygen family is as follows.

(d) Identify the group having metal, non-metal, liquid as well as gas at the room temperature.

Ans: At room temperature, Group 17 contains metals, nonmetals, liquids, and gases.

 

Group 1 elements have only one valence electron, which they frequently lose. The noble gas structure, on the other hand, requires only one electron for Group 17 elements. The ionization enthalpies drop as you move along group 1. This reduces the energy required to remove the valence electron. As a result, on moving down a group, the reactivity increases. Li<Na<K<Rb<Cs As a result, the following is the increasing order of reactivity among group 1 elements:

The electron gain enthalpy decreases as we proceed down the group from Cl to I in group 17. Its tendency to gain electrons reduces as it moves along group 17. As a result, responsiveness reduces the size of a group. F has a lower negative electron gain enthalpy than Cl. Even yet, it is the most reactive of the halogens. This is due to the fact that it has a low bond dissociation energy. As a result, the following is the decreasing order of reactivity among group 17 elements: F>Cl>Br>I.

 

s block element: ns1−2, where, n=2−7

p block element: ns2np1−6, where, n=2−6

d block element: (n−1)d1−10ns0−2, where, n=4−7

f block element: (n−2)f1−14(n−1)d1−10ns2, where, n=6−7

 

(i) ns2np4,for n=3

Ans: The element belongs to the 3rd period since n=3. Because the last electron occupies the p orbital, it is a p–block element. In the p–orbital, there are four electrons. As a result, the element's matching group.

(ii) (n−1)d2ns2,for n=4

Ans: The element belongs to the 4th period since n=4. Because the d– orbitals are not completely filled, it is a d–block element. In the d–orbital, there are two electrons. As a result, the element's matching group. corresponding group of element = number of elements in (d - block + s - block)  

= 2 + 2  

= 4

As a result, it belongs to the fourth period and fourth group. As a result, the element's name is Titanium.

(iii) (n−2)f7(n−1)d1ns2,for n=6 in the Periodic Table.

Ans : The element is present in the 6th period because n=6. The last electron fills the f–orbital, making it a f–block element. It belongs to group 3 of the periodic table, which includes all f-block elements. The electronic configuration is as follows:

[Xe]4f75d16s2. As a result,

atomic number = 54 + 7 + 2 + 1

= 64

As a result, the element's name is Gadolinium. 

 

(a) The least reactive element

Ans: The least reactive element is likely to be element V. This is due to the fact that it has the highest initial ionization enthalpy (ΔiH1) and the highest positive electron gain enthalpy (ΔegH).

(b) The most reactive metal.

Ans: Because it has the lowest first ionization enthalpy (ΔiH1) and a low negative electron gain enthalpy (ΔegH). Element II is predicted to be the most reactive metal.

(c) The most reactive non-metal.

Ans: Element III, with a high first ionization enthalpy (ΔiH1) and the largest negative electron gain enthalpy (ΔegH). is anticipated to be the most reactive nonmetal.

(d) The least reactive non-metal.

Ans: Because it has a very high first ionization enthalpy (ΔiH2) and a positive electron gain enthalpy (ΔegH). element V is predicted to be the least reactive nonmetal.

(e) The metal which can form a stable binary halide of the formula MX2 (X=halogen).

Ans: The negative electron gain enthalpy of element VI is low(ΔegH). As a result, it is a metal. It also has the smallest second ionization enthalpy, (ΔiH2). As a result, a stable binary halide with the formula MX2 (X=halogen) can be formed.

(f) The metal which can form a predominantly stable covalent halide of the formula

MX (X=halogen)?

Ans : The first ionization energy of element I is low, whereas the second ionization energy is large. As a result, a primarily stable covalent halide with the formula MX (X=halogen) can be formed.

 

(a) Lithium and Oxygen 

Ans: Li2O

(b) Magnesium and nitrogen

Ans : Mg3N2

(c) Aluminium and iodine

Ans: AlI3

(d) Silicon and oxygen

Ans: SiO2

(e) Phosphorus and fluorine

Ans: PF3 or PF5

(f) Element 71 and fluorine

Ans: Lutetium is an element with the atomic number 71. (Lu). It has a valency of three. As a result, the compound's formula is LuF3.

In the Modern periodic table, the value of the primary quantum number (n) for the outermost shell or the valence shell denotes a period.

 

Because a maximum of 10 electrons can fill all of the orbitals in a d subshell, the

d-block contains ten columns.

 

The valence electrons are unaffected by nuclear mass.

 

The valence electrons are unaffected by nuclear mass.

The nucleus is more attracted to electrons in orbitals with a lower n value than electrons in orbitals with a higher n value. As a result, removing electrons from orbitals with a larger n value is easier than removing electrons from orbitals with a smaller n value.

Over time, the metallic character of components reduces from left to right. As a result,

Mg has a more metallic quality than Al. Elements get more metallic as they progress through the group. As a result, Al has a more metallic character than B.

K>Mg is the result of the foregoing statements. As a result, the right metallic character order is K>Mg>Al>B

 

Over time, the non-metallic nature of elements grows from left to right.

F>N>C>B is the decreasing order of non-metallic nature. The non-metallic nature of elements reduces with each successive group. As a result, the non-metallic characteristics of C and Si are in decreasing order:

C>Si. Si, on the other hand, is less non-metallic than B, hence B>Si.

 

Over time, the oxidizing property of elements rises from left to right. As a result, we have

F>O>N as the decreasing order of oxidizing properties. The ability of elements to oxidize reduces as they progress through a group. As a result, F>Cl. However, O has a higher oxidizing character than Cl, i.e.O>Cl. As a result, in terms of their oxidizing property, the right sequence of chemical reactivity of F, Cl, O and N, is F>O>Cl>N.